Eavestrough Alternative - Rainhandler Rain Dispersal System
no cleaning, no ground erosion, no maintenance, Rainhandler works.
Rainhandler Accessories
Drip Edge Extenders
Use when a shingled roof edge extends less than 11/2 inches from vertical fascia 3”x60” 32 mil aluminum, brown or natural Install by sliding under shingles until drip edge is centered over Rainhandler. Tilt upwards, remove paper from adhesive. Press down to secure.
Or if preferred use the 'special drip
edge extenders'.
Special Drip Edge Extenders
Use when a tile, metal or built up roof extends less than 11/2 inches from vertical fascia 32 mil aluminum, brown or natural 85 degree angle, 1/4 inch radius rolled edge 23/4 inch x 60 inch bent to shape Horizontal width 2 inches 5 aluminum screws fasten each length to fascia.
Vertical Adapters
When the facia is less than 5 1/2" inches these adapters will extend the Rainfhandler low enough. Comes in packages of 3 and are available in Brown, White & Aluminum.
Roof Valley Diverters
Designed to fit most roof valleys, they prevent the runoff water from overshooting the Rainhandlers. Locate on roofing at bottom of valley about 1/2 to 1 inch below drip edge.
Doorbrella
Designed to divert roofwater to one or both sides of an unprotected doorway and then to the Rainhandlers for dispersion. Adhesive strip secures in place. Pack putty along upper edges as needed to fill spaces between shingles or roof ribs.
"We live in the north where we have 5-7 months of winter. The Rainhandlers work well dispersing away from the house as stated. We really like the easy maintenance and it's appearance, so unobtrusive. Thank you for your product."
